Select 410 Close Window
 Print Sheet


CLASSIFICATIONS: E410T0-1, E410T0-4 per AWS A5.22

Select 410, which contains 12% chromium, is a flux cored electrode designed for single or multiple pass welding in the flat or horizontal positions. The weld deposit is air hardening and is normally heat-treated after welding.

APPLICATIONS: Select 410 is utilized to weld straight 410 stainless steel. It provides good corrosion and oxidation resistance up to 1200°F.

DIAMETERS: .045", 1/16", 3/32"

SHIELDING GASES: 100% CO2, 75-80% Ar/20-25% CO2, 40-55 cfh

WELDING POSITIONS: Flat and Horizontal

CHARACTERISTICS:

  • Low spatter.
  • Smooth spray arc transfer.
  • Produces finely rippled bead.
  • Self peeling slag minimizes cleanup time.
Typical Mechanical Properties
  75% Ar/
25% CO2
SR 1 Hr. @ 1375°F
Ultimate Tensile Strength (psi) 78,000
Yield Strength (psi) 45,000
Percent Elongation 24

Typical Deposit Composition
Wt% C Mn Si Cr
75 Ar/25 CO2
.07 .70 .50 12.80

TYPICAL WELDING PARAMETERS (CO2)
  Optimum Range
Diam. Amps Volts WFS Amps Volts
.045" 250 28* 450 130-300 21-32
1/16" 330 29* 330 150-400 22-34
3/32" 425 29 180 300-550 26-34

* Decrease by 1 volt when using Ar 25% CO2.