Select 410-AP Close Window
 Print Sheet


CLASSIFICATIONS: E410T1-1, E410T1-4 per AWS A5.22

This flux cored, gas-shielded, stainless steel electrode is contains 12% chromium. The weld deposit is air hardening and is normally heat-treated after welding.

APPLICATIONS: Select 410-AP is commonly used to weld straight 410-AP stainless steel. This electrode provides good corrosion and oxidation resistance up to 1200°F.

DIAMETERS: .045", 1/16"

SHIELDING GAS: 100% CO
2, 75-80% Ar/balance CO2, 40-55 cfh

WELDING POSITIONS: All positions

CHARACTERISTICS:

  • Superb all position performance.
  • Flat, well washed beads achieved with minimal weaving.
  • Very low spatter.
  • Slag peeling is excellent.
Typical Mechanical Properties
  SR 1 Hr. @ 1375°F
  CO2 75% Ar/
25% CO2
Ultimate Tensile Strength (psi) 96,700 91,900
Yield Strength (psi) 79,000 73,400
Percent Elongation 20 20

Typical Deposit Composition
Wt% C Mn Si Cr
CO2 .08 .70 .50 12.30
75 Ar/25 CO2
.08 .50 .57 11.50

TYPICAL WELDING PARAMETERS (CO2) *
  Optimum Range
Diam. Position Amps
WFS Voltage Amps Volts
1/16" Flat 330 330 29 150 - 400 22 - 34
  Overhead 225 180 26 150 - 310 22 - 28
  Vertical up 225 180 25 150 - 280 22 - 27
.045" Flat 250 450 28 130 - 300 21 - 32
  Overhead 190 305 26 150 - 280 21 - 30
  Vertical up 190 305 25 130 - 260 21 - 29

* Reduce by 1 volt when using Ar+20-25% CO2.